I. Product Overview
The waterproof leakage tester developed and manufactured by Jinan SUPER Technology Co., Ltd. is used to detect the waterproof and leakage performance of products such as watches, cameras and mobile phones. It can simulate leakage testing under a water depth of up to 50 meters. Equipped with an automatic control instrument, the equipment can perform pressure tests under positive pressure, vacuum and other working conditions. The system automatically sets the corresponding test pressure and can be configured with data recording and storage devices as required to realize automatic product testing.
II. Product Composition of Waterproof Leakage Tester
Waterproof Test Chamber
Made of transparent plastic or stainless steel; customized size is available upon request.
Pressure Control System
It realizes pressure regulation within the range of positive pressure 500 kPa to negative pressure -80 kPa, and controls pressure holding time, test pressure and other parameters.
Pressure Generating Device
Used to generate positive pressure and vacuum pressure.
III. Features of Waterproof Testing Machine
Customizable test chambers with different diameters and heights to accommodate test pieces according to customer requirements.
Support setting of various test pressures and pressure holding times for leakage observation of tested workpieces.
Equipped with touch screen control.
IV. Technical Parameters
Test Pressure: -80 kPa ~ 500 kPa
Inner Diameter of Test Chamber: 1000 mm
Pressure Display Accuracy: 0.1 kPa
Working Medium: Clean water, air
Optional configuration: data acquisition system and automatic clamping device
V. Model Selection
Product Name |
Waterproof Leak Tester-Waterproof Testing Machine |
Model |
SUP_FS
|
Basic Principle |
Select the corresponding pressure according to the simulated water depth.
A water depth of 10 meters corresponds to a pressure of 100 kPa (1 standard atmospheric pressure).
Pressure regulation and testing are realized by setting different test pressures and pressure holding times. |
Performance Parameters |
Simulated Depth |
Within 50 meters water depth |
Control Accuracy |
±2% |
Pressure Accuracy |
0.1KPa |
Test Medium |
Water, Air |
Pressure Control Mode |
Instrument Control、Computer Control |
Clamping Mode |
Manual and Automatic Clamping |
Number of Test Samples |
1 |
Test Chamber Material |
Plastic or Stainless Steel |
Scope of Application |
Mobile phones, watches, waterproof cameras and other products |
Subsea pipelines, umbilical cables, subsea communication optical cables and pipeline collapse testing machines are mainly used to conduct external hydrostatic pressure collapse tests on subsea pipelines under deep-sea environment conditions: pressure from 0~100.0 MPa and temperature from -2℃~30℃ (simulating water depths of 1~10000 meters). The test results are read and acquired via supporting test software.
This camera integrates a high-definition camera with high-efficiency low-voltage light sources and other accessories as an all-in-one unit, and is applied to underwater monitoring and exploration.
It is widely used in seabed mineral development, deep-sea salvage, underwater life research, marine environmental investigation, marine ecological environment monitoring, national defense and military fields and other scenarios.
Deep-sea underwater camera, rated for a maximum water depth of 10,000 meters.
The nuclear capacitor hydrostatic test system developed by Jinan SUPER Technology Co., Ltd. consists of three parts: a gas-liquid pressurization system, a pressure control system and a video monitoring system.
It adopts water or oil as the test medium and can perform hydrostatic tests of different pressure levels according to specific working conditions.
The entire test process is fully automatically controlled by computer. All test settings and operations can be completed on the automatic control console. Each valve can also be controlled manually and remotely independently, realizing unattended operation for full-range pressure testing.
shuiyashiyji
|
