The SUPER hydrostatic testing machine offers various control modes, including manual control, instrument control, and semi-automatic control. It can achieve a pressure range of up to 600 MPa. The test media include fresh water, hydraulic oil, emulsion, etc.

The application scope of the hydrostatic testing machine covers a wide range of products, including valves, steel pipes, rubber hoses, connectors, cast aluminum housings, nodular cast iron parts, pressure vessels, gas cylinders, motor housings, water pump housings, plastic pipes, water heaters, tanks, pipe fittings, tank trucks, and other similar containers.

Selection of hydraulic press model：

Partial product cases：

External Measurement Hydrostatic Testing Machine for Gas Cylinders

Hydrostatic testing machine for pressure vessels

Hydrostatic testing machine for valves

Hydrostatic testing machine for rubber hoses and steel pipes (manual control)

Rubber hose burst testing machine (with data acquisition and report printing capabilities)

Hydrostatic testing machine for oil valves and pipe manifolds

Subsea underwater simulation testing machine

Hydrostatic testing bench for intercoolers and radiators

Hydrostatic testing machine for pipe fittings and valves

Pulse testing machine

Pipe fitting burst testing machine

Data Acquisition Software

High-Pressure Hydrostatic Pressure Booster Pump (Model SUP_G)

Portable Hydrostatic Pressure Testing Machine

High-Pressure Hydrostatic Pressure Booster Pump (Model SUP_M)

Hydrostatic Pressure Testing Machine for Explosion-Proof Enclosures

Harmonica Tube Burst Testing Machine

Internal Hydrostatic Pressure Testing Machine for Concrete Drainage Pipes

Gearbox Housing Hydrostatic Test Machine

Ceramic Product Hydrostatic Pressure Test Equipment

Valve Hydrostatic Test Machine

Cylinder Water Jacket Volumetric Expansion Test Machine

Pressure Vessel Hydrostatic Test Machine

Technical Requirements for Plate Heat Exchanger Pressure Test Equipment

Blowout Preventer Hydraulic Seal Test System

Insulating Joint Hydrostatic Test

Engine Cylinder Head Hydrostatic Test Machine

Screen Pipe Burst Pressure Test Bench

Direct Expansion Test Machine for Gas Cylinders

Mold Leak Test Machine (Using Water)

Water Purifier Pressure Test Equipment

How to Select Hydrostatic Test Equipment?

1. Required Test Pressure: Simate offers pressure test equipment ranging from 0.1 bar to 450 MPa. Common unit conversions include: 1 MPa = 10 bar ≈ 10 kgf/cm² = 145 psi.

2. Volume of the Test Piece: Select the appropriate pressure pump based on the required flow rate, which is determined by the internal volume of the product being tested.

3. Need for Special Fixtures? Fixtures are used to seal the test piece. For example, valve testing requires specific valve testing fixtures. We provide various clamping mechanisms, such as three-jaw clamps and gantry clamping systems.

4. Other Requirements: These may include specified test water temperature, or whether test flow rate data needs to be collected.

5. Control Method for the Hydrostatic Test: We offer manual control, semi-automatic control, and fully automatic control systems.

6. Custom Solutions: Simate can provide complete, tailored solutions based on customer requirements. Below are some examples of our product cases for your reference. Please feel free to call for inquiries.