I. Application Range
The hydrostatic testing equipment developed by Jinan SUPER is widely used for pressure testing of housings, pipe fittings, pressure vessels, and similar components. It features data printing, data acquisition, and is equipped with a USB port, allowing data to be exported to a computer at any time without manual intervention. Quality traceability is supported.
II. System Composition
The hydrostatic testing machine is equipped with a Simingte booster pump, enabling pressure testing at various levels with adjustable pressure.
Dual-pump operation: one filling pump and one pressure testing pump.
Capable of printing test reports in both Chinese and English.
Paperless data recording and data acquisition—simply plug in a USB drive.
III. Equipment Features
Equipped with a control unit for easy adjustment of output pressure and test duration.
Computer-based data acquisition with the ability to print bilingual (Chinese/English) test reports.
Features paperless recording equipment for paperless documentation of the pressure testing process.
Automatic pressure relief after test completion, accompanied by an audible and visual alarm.
IV. Technical Specifications
Data Recording: Optional manual recording or computer-based recording.
Pressure: Up to 300 MPa, adjustable within a certain range (pressure levels vary by model, ranging from 1 MPa to 300 MPa).
Time Control: Pressure holding time is controlled via a time relay, with an audible and visual alarm when the set time is reached.
Pressurization Time: The dual-pump design (filling first, then pressurizing) significantly reduces the time required for pressurization.
Test Medium: Water, oil, or emulsion are all acceptable.
Operation: One-touch operation with full automation.
五、Model Selection
Product Name |
Hydrostatic Testing Machine for Housings, Pressure Vessels, and Pipe Fittings |
Model |
SUP_KT |
Basic Principle |
The filling pump performs pre-filling first, followed by pressurization by the high-pressure pump. |
Performance Parameters |
Test Pressure |
0~300MPa |
Pressure Control Accuracy |
+2% of the upper limit and -1% of the lower limit of the test pressure value |
Pressure Value Resolution |
0.1MPa |
Pressure Sensor |
Test pressure sampling interval: 1 s |
Test Medium |
Water, Oil, Emulsion |
Operation Mode |
Solenoid Valve |
Operation Mode |
Automatic |
Time Control |
Automatic pressure holding, automatic pressure relief after the test is completed. |
Scope of application |
Pipes, shells, valves, vessels, etc. |
|
