济南思明特科技有限公司
 
Homepage         About us        Product         Industries            News        Technical              Contact
Advocating quality and optimizing services
general product
Pressure Pulsation Testing Benches Pressure Pulsation Testing Benches
Blasting Test Bench Blasting Test Bench
思明特气体增压泵 Water Testing benches
思明特液体增压泵

Leakage testing benches

思明特空气增压泵 Booster pump
空气泵SUP_Y系列 SUP Gas Booster
空气泵SUP_W系列 SUP Liquid Pump
 
 
product

Your current location:Homepage>Product>Ternary Flow Automatic Gas Mixing Device

Ternary Flow Automatic Gas Mixing Device

一、Product Introduction
The three-component flow automatic gas mixing device developed by Jinan SUPER Technology Co., Ltd. adopts multi-channel synchronous pressure stabilization. It adjusts the flow rate by controlling the opening of air and combustible gas valves respectively, so as to realize gas components with different mixing ratios.
The control system adopts intelligent PID software self-tuning control, supporting open-loop (manual) and closed-loop (self-tuning) regulation modes. It can automatically eliminate static control error, featuring stable operation and non-oscillation. The actuators adopt imported high-precision regulating valves.
Ternary Flow Automatic Gas Mixing Device

Ⅱ. Technical Parameters of Three-Component Flow Automatic Gas Mixing Device
Two regulation modes: open-loop (manual) and closed-loop (automatic).
Imported components are adopted for the synchronous pressure stabilizer.
Imported oxygen sensor:
Measuring range: 0–25%VOL
Output signal: 4–20 mA
Response time: <15 s
Accuracy: ±1%FS
Repeatability: <1%FS
Linear error: <1%FS
Operating temperature: 0–50 ℃
Warm-up time: <2 minutes
Ⅲ. Features of Three-Component Flow Automatic Gas Mixing Device
The pressure sensor supports local display and remote transmission dual modes.
Equipped with three imported high-precision regulating valves with valve positioners to dynamically adjust the opening of three-way valves.
The gas mixing system runs stably without oscillation and is slightly affected by flow fluctuation.
One-key automatic gas distribution and automatic valve opening/closing adjustment are available.

 

liuliangshiyanji-l

Other Products
The water cold plate flow resistance testing machine is mainly used for the flow resistance test of water cold plates. It adopts a high-pressure pump for pressure loading and realizes pressure control via a computer, with test reports exportable. It is widely applicable to production factories, product quality inspection institutes, scientific research institutions, colleges and other entities for the production inspection, development and research of various water cooling products.
Water Cooling Plate Flow Resistance Testing Machine
相关技术资料 相关产品

手动燃气阀门壳体强度试验与气密性试验方法

手动燃气阀耐久性试验与耐高温、低温试验方法

燃气调压器气密性检测台(低压)试验方法和要求

阀门水压试验机

液压阀门试验台

Previous item Next item

Automatic Controlled Hydrostatic Pressure Test System

Steel Pipe Hydrostatic Burst Pressurization System

 

 

 

Hydraulic Pressure Testing Machine      High Pressure Safety Valve Test Bench        Deep-Sea Hydrostatic Pressure Test Device      Product

Address: No. 3-B-2, PowerChina Energy Valley, No. 5577 North Gongye Road, Jinan CityPostal Code: 250101Tel: 0531-67809989 / 88885633Contact: Chen XiangfengMobile: (0)15098952510Copyright © Jinan SUPER Technology Co., Ltd.Technical Support: Chenfeng TechnologyLu ICP Bei No. 11004523-1