Ⅰ. Product Introduction
The metal pressure vessel hydrostatic test bench developed by Jinan SUPER Technology Co., Ltd. is mainly used for hydrostatic holding pressure tests and hydrostatic burst tests of metal pressure vessels.
Core components of the equipment, such as pumps, valves and sensors, adopt world-class brands. Electrical components are selected from first-class international or high-quality domestic products.

Ⅱ. Technical Parameters of Metal Pressure Vessel Hydrostatic Test Bench
Three-phase AC power: 380V±10%
Frequency: 50Hz±1%
Ambient conditions:
Relative humidity: ≤90%
Ambient temperature: 0～45℃
Test piece specification range:
Large size: Φ1200mm×4000mm
Small size: Φ50mm×150mm
Maximum test pressure: ≥150MPa
Equipped with a large-size test piece cabinet for large workpieces, dimensions: 4200mm (L) × 1500mm (W) × 1500mm (H);
Equipped with a small-size test piece cabinet for small workpieces, dimensions: 1500mm (L) × 800mm (W) × 1200mm (H);
The two cabinets share the same gas-liquid pressurization unit.
Pressure sensor accuracy: better than ±0.25%FS
Pressure display resolution: 0.01MPa

Developed by Jinan SUPER Technology Co., Ltd., the cleaner pressure pump test bench is mainly used for performance detection of cleaner pressure pumps.
The test bench collects relevant test parameters through sensors, and automatically judges whether the tested product is qualified or not according to the preset values.