The SUPER H Series gas pumps adopt a single pneumatically controlled unbalanced gas distribution valve to achieve the reciprocating motion of the pump.
All components are made of aluminum alloy and stainless steel.
All seals are imported high-quality products.
The designed drive air pressure is 10 bar; to ensure the service life of the pump, a drive air pressure of < 8 bar is recommended.
The drive piston diameter of this series is 160 mm.
These are single-acting pumps, and all single-acting pumps are equipped with exhaust cooling.
Model |
Pressure Ratio |
Rated Pressure |
Static Output Pressure |
Minimum Inlet Pressure
Ps |
Flow rate
L/min |
Pa |
Po |
H-1 |
1:1 |
10bar |
8bar |
1*Pa |
0.7bar |
625 |
H-2 |
2:1 |
10bar |
16bar |
2*Pa |
1.7bar |
412 |
H-5 |
5:1 |
10bar |
40bar |
5*Pa |
3.5bar |
196 |
H-10 |
10:1 |
10bar |
80bar |
10*Pa |
5.5bar |
169 |
H-25 |
25:1 |
10bar |
200bar |
25*Pa |
10bar |
81 |
H-40 |
40:1 |
10bar |
320bar |
40*Pa |
15bar |
61 |
H-60 |
60:1 |
10bar |
480bar |
60*Pa |
25bar |
49 |
H-100 |
100:1 |
10bar |
800bar |
100*Pa |
35bar |
39 |
Pa=驱动气压 Ps=输入气压 Po=输出气压 Pa=6bar·Ps=8bar
压力换算关系：1MPa=10bar=10公斤
Applications of SUPER Gas-Gas Booster Pumps
Provide static and burst testing for pipe fittings, hoses, valves, pressure vessels, cylinders, etc.
Static and dynamic testing of aerospace accessories after maintenance
Safety valve calibration
Underwater bubble testing of valves and wellhead equipment
Testing of pressure regulators
Automotive brake system testing
Communication cable inflation equipment
Nitrogen filling for aircraft tires and hydraulic accumulators
High-pressure nitrogen filling in gas-assisted injection molding
Compression of ultra-pure gases (CO₂ supercritical extraction)
Capable of boosting various gases including oxygen, nitrogen, hydrogen, air, methane, etc.
SUPER provides gas-gas booster pumps for gas sampling to facilitate laboratory analysis.
The equipment is available in both pneumatic and 220V electric versions.
It is equipped with a high-pressure buffer tank, which can store the sampled gas.
The test gas pressure can reach up to 30 MPa.
The pneumatic gas sampling pump uses low-pressure air as the power source.
The equipment pressure is stepless adjustable and can be used in explosion-proof environments.
Related Products：
The G Series pneumatically driven liquid booster pump is used for pressurizing liquid media, with a maximum ultra-high pressure up to 320 MPa.
The drive air pressure ranges from 0.2–0.8 MPa, and the pressure is stepless adjustable.
It consumes no energy during pressure holding and allows frequent starting.
|
