Reactor Cooling Device Flow, Pressure Loss & Pressure Cycle Testing Machine
I. Product Introduction
The Reactor Cooling Device Flow, Pressure Loss and Pressure Cycle Testing Machine developed by Jinan SUPER Technology Co., Ltd. is used for testing reactor products. It measures the pressure drop of cooling systems under set flow rate, pressure and ambient temperature.
The test coolant is a mixture of 50% water and 50% ethylene glycol.
The testing machine is equipped with a water tank and filtration system.
Test parameters can be entered into the equipment, and test reports can be generated.
Upon completion of testing, the equipment will drain the coolant from the cooling system of the tested specimen.
II. Specifications of Reactor Cooling Device Flow, Pressure Loss & Pressure Cycle Testing Machine
Test Medium: Coolant, mixture of 50% water and 50% ethylene glycol
Flow rate: 6–8 L
Water tank capacity: Minimum 250 L
Quantity of specimens tested simultaneously: 1–6 pcs
Max. pressure: 25 bar
Working pressure: 8 bar
Max. flow rate: Minimum 35 L/min
Connection: 3/4" quick inlet & outlet couplings
III. Features of Reactor Cooling Device Flow, Pressure Loss & Pressure Cycle Testing Machine
All test parameters are adjustable. If a failed test is detected, the equipment shall terminate the test for the defective specimen only, without interfering with other specimens under test, which can continue testing.
Test parameters including working pressure, flow rate and number of cycles can be modified.
The control system can generate an independent test report for each specimen. The report contains all measured data mentioned above, plus tester information and signature. The template/layout of test reports is editable.
Related Products
The Liquid Filter Pressure Drop Performance Testing Machine is mainly used for pressure drop performance testing of liquid filters. It is equipped with our company’s proven pneumatic booster device as the key component, enabling easy adjustment and precise control of output pressure.
Specimens are hydraulically clamped to guarantee air tightness
maichongshiyanji-m
The Microchannel Tube Pressure Alternating Test Equipment for Liquid Cooling Plates is mainly used for pulse test, pressure drop (flow resistance) test, high/low temperature resistance test, ambient high-low temperature alternating test, medium temperature alternating test and coupled pulse & medium temperature alternating test of liquid cooling plates, direct cooling plates and microchannel tubes.
The Liquid Cooling Plate Pressure Alternating Testing Machine developed by Jinan SUPER Technology Co., Ltd. is mainly applied to pressure alternating tests of liquid cooling plates. It inspects potential failures, quality variations and evaluates operational reliability of product materials under fluctuating temperature and pressure conditions.
Adopting microcomputer control and software visualization, the testing machine features easy operation, clear display and automatic alarm function. It is indispensable testing equipment for scientific research institutes, national quality inspection organizations and liquid cooling plate manufacturers.
The Cooling Water Pipe PVT Test Bench developed by Jinan SUPER Technology Co., Ltd. is a pressure pulse testing machine equipped with linear and eccentric motion devices, mainly used for PVT testing of cooling water pipes.
This test bench is equipped with Simingte data acquisition software featuring data and report processing functions. It provides a special report editing tool for graphic layout. The system boasts flexible operation and easy learning, and supports convenient printing of test curves and test values.
The Water Purifier Cycle Life Tester is mainly used for cycle life and water hammer performance tests of water purifiers.
The tester cabinet is made of full stainless steel and equipped with a viewing window.
Adopting microcomputer control, it displays real-time pressure, curves and test data. Pressure, time, cycle counts and other data are automatically recorded and stored. The system supports generation, saving, printing and query of test reports. The equipment will trigger an alarm and stop automatically in case of test abnormalities.
|
