1. Product Overview
Heat Exchanger, Heater, Preheater, Cold and Hot Cycling, Fatigue Testing MachineHeat Exchanger, Heater, Preheater, Cold and Hot Cycling, Fatigue Testing MachineHeat Exchanger, Heater, Preheater, Cold and Hot Cycling, Fatigue Testing Machine
Adopting computer control, the equipment can store pulse pressure waveforms of nearly 200,000 thermal cycles and display pulse pressure waveforms in real time. The testing machine features simple structure, low failure rate, stable and reliable performance, and easy operation. It is widely applied in industrial and mining enterprises, scientific research institutions and colleges.
2. Technical Parameters
Fatigue test medium: Water, mixture of water and glycol
Fatigue test pressure range: 0–0.2 MPa
Pressure display accuracy: 0.01 MPa
Fatigue frequency: 1.5 minutes per cycle
Test temperature: 0–100 ℃
Test medium temperature: PID regulation and control
Test stations: 1 station
Time display: Displayed by computer
Pressure curve display: Self-developed Simite software adapts to various application scenarios with automatic curve display
Report printing: Test reports can be printed and test data saved upon test completion
Test data storage: Supports saving reports and whole test process records
Pressure accuracy: 0.25%
Low temperature adjustable range: -40 ℃～10 ℃
Temperature display accuracy: 0.1 ℃; Control accuracy: ±2 ℃
High temperature heating rate: 1～2.5 ℃/min
Low temperature cooling rate: 1～1.9 ℃/min
Working medium: Water, water-glycol mixture
Medium flow rate: 0～300 L/min
Flow display accuracy: 0.1 L/min
Cycling pressure: 50～500 KPa
3. Product Features
Supports storage of nearly 300,000 thermal cycle records.
Automatically recovers leaked medium after dismounting tested pipelines.
Built-in thermal insulation layer to stabilize ambient temperature and liquid temperature.
Pressure-time curves can be displayed on screen, printed or stored in the memory; computer controlled with USB interface for exporting and printing pressure curves.
Realizes computer-based data acquisition and processing, and prints out pressure values, fatigue cycles and fatigue pressure waveforms.
Automatic data saving upon power failure.
4. Typical Applications
Heater thermal cycle fatigue test
Preheater fatigue test
Superheater fatigue pulse test
Evaporator thermal cycle fatigue test
Factory delivery inspection of heat exchangers
Related Products
SUPER shock absorber fatigue and durability test device has a test pressure of 2 MPa. It can control test pressure, test temperature, test cycles and other parameters, and is mainly used for fatigue and durability tests of shock absorbers.
The entire control system adopts the control mode of industrial control computer + secondary control instrument system + sensor switch. All switching quantities are closed-loop monitored by PLC. Logical interlock relations are applied to ensure the safety and reliability of the system, and fault recording function is available.
For more details, please click: Shock Absorber Fatigue & Durability Test Device
pilaoshiyanji-p
|
