1. Scope of Application of Air Energy Liner Pulse Testing Machine
Developed by Jinan SUPER, the water heater liner pulse testing machine is applicable to pulse pressure tests on the liners of air energy water heaters, domestic water heaters, thermal water heaters, electric water heaters, gas water heaters and quick magnetic domestic water heaters. It is used to detect the fatigue and pressure resistance of tested workpieces.
Adopting computerized control, the equipment can regulate test pressure, test duration, test cycles and test waveform, with real-time display of pressure curves and power-off data storage available. During the test, the machine generates pulse pressure with specific waveforms and frequencies and applies it to the tested liner.
Meanwhile, the testing machine records the pressure variation, temperature change and potential leakage of the liner throughout the test. By analyzing the above data, operators can evaluate the comprehensive performance of the liner under cyclic pulse pressure, so as to carry out product improvement and structural optimization based on test results.

Ⅱ. Basic Parameters of Air Energy Liner Pulse Testing Machine
Medium: Clean water
Pulse test pressure: 0–0.8 MPa (adjustable)
Pressure control accuracy: ±1%FS
Pulse frequency: 25–60 times/min (adjustable)
Pulse pressure waveform: Basic square wave (or trapezoidal wave); pulse width can be customized as required.
Test medium temperature: Room temperature (customizable upon customer request)
Test station: 1 station

Cylinder Fatigue Testing Machine Software

Ⅲ. Equipment Composition of Air Energy Water Heater Pressure Pulse Testing Machine
This test bench consists of three main parts:
Pressure generation system.
Test cabinet: mainly used for installing test pieces, pressure regulation and system pressure indication.
Electrical control system, including computer, software, data acquisition card and other related systems.
Ⅳ. Model Selection

Related Products:

The pulse testing machine manufactured by Jinan SUPER is mainly used for factory inspection of the following parts and components:
Automobile hoses: steering pipes, brake pipes, air conditioning pipes, fuel pipes, cooling water pipes, heat dissipation hoses, intercoolers, radiators, oil coolers, water tanks, evaporators, condensers, heaters, air conditioning pipelines, coolant pipelines, heating hoses, air filter hoses, turbocharging system hoses and engineering hydraulic hoses;
Aviation hoses and manifolds;
Other hard pipes and joints, as well as pulse tests for automotive brake pumps, radiators, oil coolers and cylinder blocks.

For more details, please click: Pulse Testing Machine

maichongshiyanji-m

The aviation conduit water hammer pulse testing machine is mainly used for the water hammer pulse test of aviation conduits.
By simulating the actual working conditions of aviation pipelines, the equipment conducts tests in accordance with relevant technical standards and requirements to verify the service performance of pipe materials.
This testing machine is equipped with automatic test data acquisition and processing functions. It can automatically establish a test database for instant inquiry and permanent data storage.

The hydrogen repeated pressure cycling test system is applied to relevant tests of new energy hydrogen vehicles, including hydrogen valves, pressure reducing valves, hydrogen connectors and other hydrogen-related accessories.
The maximum test pressure reaches 80 MPa, enabling automatic pressure increase and hydrogen pressurization. The system is equipped with an automatic control system to realize automatic pressure boosting and pressure relief. Meanwhile, a temperature cabinet is configured to simulate high and low temperature environments.
Matching self-developed control software is adopted for the system. It is mainly used for life testing and hydrogen embrittlement testing of hydrogen-bearing pressure-resistant components.